Instructions / Assembly

ASSEMBLY
STEP 1
When you start to see a storm a brewin’, it’s probably a good time to pull all of the enclosure poles out of
their sockets. If you have a Skywalker Trampoline, you’ll notice that the end caps will fall out as you pull the
enclosure poles out. Place the end caps back onto enclosure poles before you lay all of the poles on top of the
jump mat. (That way you won’t scratch your mat and you’ll be able to keep track of all the end caps!)
4
STEP 2
Please disregard this step if you DO NOT have a Skywalker Trampoline. Take
the 32 mm. caps (2) and the 35 mm. caps (3) out of the bag which is sewn
on the cover. Pick the cap size that fits your trampoline best, and insert that
size into the top and bottom of all the sockets. Note: Do NOT insert the caps
into the sockets all the way because they’re difficult to remove! The caps
will protect the cover from being damaged by the sockets.
3
2
End cap
32 mm.
Cap (x12)
35 mm.
Cap (x12)