Instructions / Assembly

READ THIS BEFORE YOU BEGIN
• You’ll probably need at least 2 adults and 2 hours to assemble your trampoline (of course, that depends on what
model you have, and whether or not you’re secretly a superhero).
• We’ve provided a Phillip’s screw driver and one adjustable wrench to help with assembly, but you’re more than
welcome to use your own tools. Many find that using a power drill and a rubber mallet makes things easier.
• Use gloves to protect your hands from pinch points during assembly. Plus, it’s an up-and-coming fashion trend.
• The assembly steps refer to parts by their descriptions and key numbers (see the part list on page 3).
• The assembly steps are written in a specific order, and if you don’t follow them exactly... you may end up having to
start all over again. We promise we won’t say, “I told you so” but really... we told you so.
• Most importantly... YOU’VE GOT THIS. YOU’RE THE BEST TRAMPOLINE ASSEMBLER AROUND. This may not be the
easiest thing you’ve ever done... but it will be worth it. Trust us.
And if you’re a visual learner, check out our assembly videos!
ASSEMBLY
STEP 2
The sockets (1) should be pre-installed on the corner tubes
(2).
Check and make sure you have the four corner sections
below!
1
2
7
STEP 1
Register your trampoline! For info on warranty registration, see page 2.
Visit: youtube.com/c/SkywalkerTrampolines
Socket (may be pre-
installed) (x8)
Corner Tube (x4)
(2)
(2)
(1)
(1)
(1)
(1)
Make sure you have two of the following:
Make sure you have two of the following: