Installation Guide

BULB REPLACEMENT

• Clean the trim using a so cloth, slightly dampened with a citrus oil based product and buﬀ with a clean so cloth.

• DO NOT use brass polish or household cleaners as these products will damage the metal trim. Citrus oil based products can

be obtained at supermarkets or hardware stores.

• Periodic cleaning/vacuuming of the ﬁlter is recommended.

• WARNING: Electrical outlet wiring must comply with local building codes and other applicable regulaons to reduce the

risk of ﬁre, electrical shock and injury to persons.

• Warning: Disconnect power before aempng any maintenance or cleaning to reduce the risk of ﬁre, electrical shock or

personal injury.

CARE AND MAINTENACE

1. Loosen the 2 screws at the front of the log set inside the stove. Carefully li the logset up far enough to access the light

bulbs. You will ﬁnd 1x40w type b-10 candelabra lights bulb with e-12 socket base at the boom.

2. Replace the burned out light bulb using a new 40wa type b-10 candelabra light bulb.

3. Reinstall the logset.

4. Plug in the unit.