Instructions / Assembly

9
Door roller in top track
(31 stands for glass)
Door roller in lower track
★
★★
★
8.
Unit Assembly
a. Connect the front frame to the channeled angles
on both sides (drawing on page 3)
b. Connect left back panel to the left side panel
from the back with ½” screws and set them in
place on the base.
c. Connect right back panel to the right side panel
from the back with ½” screws and set them in
place on the base.
d. Place front-frame-angles assembly onto the base.
You need two people to move the assembly. Push
the assembly to let the edges of the side panels
fit into the channels.
e.Put the function panel close to its designated
place and connect hot and cold water supplies,
water supplies to overhead shower, hand-held
shower, body jets.
f. Connect electrical wires from the electronic
control to LED lights, Fan, and speaker. All wires
have a tag at the ends for its function. Connect
power supply transformer to the electronic
control and plug the power to the wall outlet.
g. Place the roof of the unit on top of the shower
enclosure, aligning it with the walls, and fixing it
to the wall studs through the edge foldup.
h.Please watch this video: S-3460 Overall Assembly:
https://youtu.be/qHHco9dYRO0
Backwalls are attached to the stiles
of the Side Walls with ½” screws