Installation Guide

★Hardware included:

Drain with flexible hose if you ordered 1-1/2” drain. It doesn’t come with a drain piece or

flexible hose if you ordered 2” drain. You can buy 2” drain such as Oatey at a hardware

store.

2. C

up washers and decorative chrome covers for mounting the function panel to back walls

7/8” iron screws (8pieces), ½” stainless steel screws (20 pieces), and 1/4" (4 pieces) screws

4. Glass shelf and its mounting bolts, washers, rod connectors and nuts

5. Shower head sliding bar and its mounting bolts, washers and nuts.

Flexible water hose for hand-held shower and through-wall elbow, washers and a ring nut.

7. Hand-held shower head

8. Door rollers (the spring-loaded rollers shall be installed at doors’ bottom)

9.Door handles

10.

Shampoo and soap dispensers, their mounting base and its mounting bolts, washers,

nuts (4)

★1. Pre-installation

a. Check the area you want to install your unit for the following:

b. Water hook-ups, one hot and one cold with ½” FIP female connectors on ½” PEX or

flexible hoses. Floor drain (2” hard-plumbed drain is the US standard):

1. The shower control valve needs ½” FIP Connections

2. Shutoff valves should be used for both hot and cold water supplies

3. 3-4 feet long flexible water hoses must be used from shutoff valves to shower control

valves

(i) If Pex used, please use ½” FIP of swivel type for easy installation

(ii) If Pex is not used, please use plastic or stainless braided hoses with ½” FIP

connectors at the shower’s control valve connection

(iii) Please watch this video for details: Water Supply Options:

https://www.youtube.com/watch?v=D_md6CufrxY