Full Product Manual
3. Front Frame Assembly
a. Connect curved tracks to the vertical stiles (#37)(wider stiles at the ends of the front tinted (or clear) panels)
with two metal screws(#27) as shown by the illustration.
b. The wider track(#26) is on top. Make sure the U-shaped channel of this track OPENS upwards.
c. The narrower track is on the bottom. Make sure that U-shaped channel of this track OPENS downwards.
d. Use 8 iron screws (#27)of 7/8” and magnetically tipped screw bit. The iron screws can stand on the tip of
the magnetic driver bit for easy positioning.
e. Two screws on each corner.