Full Product Manual

ManualsBrandsUnbranded ManualsBathLavish 31-1/2 in. L x 47 in. W x 84 in. H Corner Drain Oblong Corner Shower Stall Kit in White with Easy Fit Drain RH

Shower & Bath Enclosure

Installation Instructions

Thank you for purchasing Freshjet Showers’ products. We are committed to providing our customers with high quality

products at a competitive price.

Please read all instructions carefully before and during installation.

Professional help is required for installation.

These installation instructions should be used

as a guideline. Your specific

shower or bath enclosure may

differ from the figures shown in

these instructions. This

instruction is for shower models as

follows: S-1615, SE-1615, and

1615

The shower is delivered in a wood crate with carton box contents as follows:

Box 1: one big and one small front glass panels (the panels have aluminum frames), and one big and one

small glass doors (doors don’t have Al frames)

Box 2: function panel with pressure balance valve, water hoses, body jets, and electronic control box

Box 3: one big and one small back wall panels (the panels have Al frames)

Box 4: shower base and top, door tracks tucked under the base, and a hardware box of size 23”X10”X4”

Hardware

included:

1. Drain with flexible hose if you ordered 1-1/2” drain. It doesn’t come with a drain piece or flexible hose if

you ordered 2” drain. You can buy 2” drain such as Oatey at a hardware store. If Easy-Fit drain is ordered,

we recommend to use EZ Flo 1-1/4” flexible PVC hose (which is not included with EFD).

2. 10 cup washers and decorative chrome covers for mounting the function panel to back walls

3. 7/8” iron screws (8pieces), ½” stainless steel screws (20 pieces), and 1/4" (4 pieces) long screws

4. Glass shelf and its mounting bolts, washers, and nuts

5. Shower head sliding bar and its mounting bolts, washers and nuts.

6. Flexible water hose for hand-held shower and through-wall elbow, washers and a ring nut.

7. Hand-held shower head

8. 8 door rollers (four double rollers on top, and four double rollers with springs on the bottom of the doors)

9. 2 door handles

10. Mirror and two big head mounting bolts

11. Shampoo and soap dispensers, their mounting base and its mounting bolts, washers, nuts (4)

Summary of content (11 pages)

PAGE 1
Shower & Bath Enclosure Installation Instructions Thank you for purchasing Freshjet Showers’ products. We are committed to providing our customers with high quality products at a competitive price. Please read all instructions carefully before and during installation. Professional help is required for installation. These installation instructions should be used as a guideline. Your specific shower or bath enclosure may differ from the figures shown in these instructions.
PAGE 2
1. Pre-installation Check the area you want to install your unit for the following: a. Water hook-ups, one hot and one cold with ½” FIP male connectors on ½” PEX or flexible hoses (shutoff valves are preferred for both hot and cold water supplies). b. Two 3’(or longer) stainless steel braided ½” water hoses with both ½” FIP female threads at both ends c. Floor drain (2” hard-plumbed drain is the US standard) d. Wall studs.
PAGE 3
. Front Frame Assembly a. Connect curved tracks to the vertical stiles (#37)(wider stiles at the ends of the front tinted (or clear) panels) with two metal screws(#27) as shown by the illustration. b. The wider track(#26) is on top. Make sure the U-shaped channel of this track OPENS upwards. c. The narrower track is on the bottom. Make sure that U-shaped channel of this track OPENS downwards. d. Use 8 iron screws (#27)of 7/8” and magnetically tipped screw bit.
PAGE 4
. Second Points of Attachment of Front Panels to the Tracks Attach the smaller vertical stiles of the front panels to both the top and bottom tracks. From inside and in the middle (#24) of the track, use 3/16” drill bit to drill through both layers of the track and first layer of the small stile. Use 3/8” drill bit to drill through the first layer of the track (inside layer). Use ¼” screw to attach both top and bottom tracks to the small stiles. Repeat the same procedure for the other front panel.
PAGE 5
. Glass Door Assembly a. Two types of door rollers are provided: top rollers with threaded shaft for height adjustable, and bottom rollers with spring loaded push-in mechanism. b. Locate handle holes on the doors and install water seal strips with magnets (dark brown or white) on the edges near the door handles and clear strips (4) to the other edges as shown by the illustration.
PAGE 6
. Back wall Assembly a. Install glass shelf, hand-held sliding bar or mounting bracket, towel bar if applicable, soap/shampoo dispensers, mirror, through-wall elbows to back walls through pre-drilled holes. b.
PAGE 7
Hand-held shower Hand-held shower Head sliding bar For some models, water supply are done “through-wall elbow” Door Handle Installation 7. Glass Door Installation a. Put rollers on top of the doors into the top rail first. The rollers with screws are for the top, and springs bottom. b. Then push the rollers downward to let the rollers to cut into the bottom rail. c. Install the door handles. d. Install the magnetic door seals to the front edges of the doors. e.
PAGE 8
Door roller in top track Door roller in lower track (31 stands for glass)
PAGE 9
8. Unit Assembly a. Connect the front frame with two side-back walls. Set both back panels on top the base and close to their designated locations. Both back walls should have all their necessary components installed. b. Set the front frame onto the base. Push a back wall to the frame and pull against L edge of the front frame post #37. Use 5 of ½” stainless steel screws to secure the back wall to the front frame. Repeat the same procedure for the other back wall. c.
PAGE 10
. Caulking and Anchoring Use silicon sealant to seal all of the seams or joints from inside the shower. Slant two 3” drywall screws to attach the shower to the walls through the holes on the two front stiles on the top (see drawing of the stile on last page).
PAGE 11
Shower Drain and Water Supply Recommendations Water Supplies: 1. The shower control valve needs ½” FIP Connections 2. Shutoff valves should be used for both hot and cold water supplies 3. 3-4 feet long flexible water hoses must be used from shutoff valves to shower control valves A. If Pex used, please use ½” FIP of swivel type for easy installation B. If Pex is not used, please use plastic or stainless braided hoses with ½” FIP connectors at the shower’s control valve connection Drain Connections: 1.