User Manual

www . SkylarkFPV . com
Alarm-mode
Alarm-mode
Alarm-mode
Alarm-mode
The default
Alarm-mode
would not display any information, it would only display the corresponding
warning information and flash.
When the GPS signal is not strong enough,
speed, altitude, returning angle & direction
,
horizontal
distance corresponding to the point of departure
would be displayed and flash. When the signal becomes
fine, the information would disappear automatically. When it is under voltage because of not enough
electricity (for example, the voltage of 3S battery is lower than 10.6V), the
voltage
and
remaining
electricity
would be displayed and flash. The following diagram shows the
Alarm-mode
with under voltage
warning.