User Manual

www . SkylarkFPV . com
Simple-mode
Simple-mode
Simple-mode
Simple-mode
Simple-mode would only display the common and critical indication information, including
speed
,
returning angle & direction
,
horizontal distance corresponding to the point of departure
,
voltage
,
electricity consumption
and
remaining electricity
, which are shown in the following diagram.
Same as
Details-mode
, when the GPS signal is not strong enough,
speed, altitude, returning angle &
direction
,
horizontal distance corresponding to the point of departure
would be flashing. When the signal
becomes fine, flashing would stop automatically. When it is under voltage because of not enough
electricity (for example, the voltage of 3S battery is lower than 10.6V), the
voltage
and
remaining
electricity
would be flashing to remind the user to take appropriate actions.