User Manual
www . SkylarkFPV . com
The three-way switch of “ Autopilot ” represents:
is displayed on OSD, which is the Manual Mode
is displayed on OSD, which is the Attitude Control Mode
is displayed on OSD, which is the Return Flight Mode
is displayed on OSD, which is the Waypoints Mode
If there are 4 or more GPS satellites and the take-off position has not been locked, user will find the
flashing icon in Return Flight Mode.
If the GPS is not connected or there are less than 4 satellites, user will find the flashing icon .
That means it is not allowed to enter the Return Flight Mode.
All the parameters would be overwritten after software upgrade, thus calibration must be executed once
again.
In Flying Mode, user can quit the OSD
Details-mode
Details-mode
Details-mode
Details-mode
(by sliding the “ Switch ” channel switch 3 times) and
enter the Configuration Mode for adjustment. The Configuration Mode can be entered only within 30
meters from the take-off point.