Manual

170
Starting up and functions
1. Insert the power plug in the power socket.
2. Activate the main switch (1).
The current temperature is shown on the display shortly thereafter.
3. Press the + (3) or – (4) button to set the desired temperature.
4. Press the button (5) to access the manual timer.
Each subsequent press increases the heating time by one hour.
One press for 1 hour up to 24 presses for 24 hours are possible.
The appliance switches itself off after the time has been set.
5. Press and hold the + (3) button to switch off the heater directly on the panel.
Step 1. Use the supplied
template to mark the
positions of the holes on the
wall.
Step 2. Drill holes with
with an 8 mm drill bit.
Step 3. Insert the wall plugs
in the holes.
Step 4. Screw the
supplied screws into
the wall.
Step 5. Attach the
panel to the screws.
Step 6. Move the
panel to the left and then
down until it is secured.