Use and Care Manual

6
SPECIFICATIONS
Questions or Problems? Contact Us!
info@supportcbp.com | 833-876-2922
The cigar cooler
vibrates while
operating.
The cooler is positioned on an
unstable surface.
Make sure the unit is placed on a
level, stable surface.
The cigar cooler
produces a lot of
noise.
The cooler is positioned on an
unstable surface.
Make sure the unit is placed on a
level, stable surface.
The fan may not be working properly. Contact Schmécké customer support.
The cigar cooler will
not close properly.
The cooler is positioned on an
unstable surface.
Make sure the unit is placed on a
level, stable surface.
The doors are reversed and not
properly installed.
Review the instructions for installing
the door gasket in this user guide.
The seal has weakened. Contact Schmécké customer support.
The LED display does
not work.
The main control board may be
damaged or otherwise
malfunctioning.
Contact Schmécké customer support.
The plug may be damaged. Contact Schmécké customer support.
There is an LED display
error.
There is a PCB problem.
Contact Schmécké customer support.
The buttons do not
function.
The temperature control panel may
be damaged.
Contact Schmécké customer support.
Frost or ice developed
inside the cigar
cooler.
Ambient temperature too low.
Restart the unit.
SHMCC0251SS SHMCC0331SS SHMCC0501SS
Power Supply 115 V / 60 Hz 115 V / 60 Hz 115 V / 60 Hz
Rated Power 65 W 65 W 65 W
Temperature
Range
61°-72°F (16°-22°C) 61°-72°F (16°-22°C) 61°-72°F (16°-22°C)
Dimensions 9.9” x 19.7” x 17.8”
(
25.2 x 50 x 45.3 cm
)
13.6” x 20” x 18.9”
(
34.5 x 51 x 48 cm
)
13.6” x 20.5” x 25.4”
34.5 x 52 x 64.5 cm
Weight 20.9 lbs.
(
9.5 kg
)
25.6 lbs.
(
11.6 kg
)
31.7 lbs.
14.5 kg
Total Capacity 25 L / 0.9 ft³ 33 L / 1.2 ft³ 50 L / 1.8 ft³
SCHMECKE is a trademark of C&A IP Holdings, LLC in the US.
www.schmecke.com
Distributed by: C&A Marketing, Inc., 114 Tived Lane East, Edison, NJ 08837 USA
C&A Marketing UK LTD, 167 Hermitage Road, Crusader Industrial Estate, London N4 1LZ, UK
©2018 All Rights Reserved.
MADE IN CHINA
TROUBLESHOOTING (continued)