Use and Care Manual

2
Thank you for purchasing the Schmécké Cigar Humidor Cooler. This User Guide is intended to provide you with
guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does
not conform to the guidelines described in this User Guide may void the limited warranty.
Please read all directions before using the product and retain this guide for reference. This product is intended
for household use only.
This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions. See warranty
for details.
SAFETY PRECAUTIONS
• Never allow children to operate, play with, or crawl inside the cigar cooler.
• Never clean cigar cooler parts with flammable liquids, as the fumes can create a fire hazard or explosion.
• Do not store or use gasoline or any other flammable liquids in the vicinity of this appliance. The fumes can
create a fire hazard or explosion.
• Do not attempt to repair or replace any part of the unit. There are no user-serviceable parts.
• When choosing a location to store your cigar cooler, always ensure that the plug is accessible.
• Keep the unit out of direct sunlight
• Do not place the unit near any heat-generating appliances.
• Place the cigar cooler on a level surface that is strong enough to support the unit when it is fully loaded.
• Always keep the cigar cooler in a dry, well-ventilated space with an ambient temperature between 50°–
80°F (10°–26°C).
• Before connecting the unit to a power source for the first time, allow it stand upright for approximately two (2)
hours. This will reduce the possibility of any system malfunctions which may have occurred from handling
during shipping.
• When positioning the cigar cooler, be sure to leave at least 6 inches of space at the back and 10 inches on
both sides. This is to ensure that none of the ventilation openings are blocked.
• Do not place any objects on top of the unit as this may block air circulation.
• This unit requires a standard 110V-60Hz electrical outlet. The unit should be properly grounded for your safety
and in order to minimize the possibility of electrical shock.
• Never cut or remove the ground wire from the supplied power cord.
• We do not recommend using extension cords with this product.
• The cord should be secured behind the cigar cooler. Also, to prevent accidental injury, do not expose or
dangle the cord.
• Do not install the cigar cooler in a closed cabinet or any other area that lacks proper ventilation.
• Do not remove the feet on the bottom of the cigar cooler. The unit requires at least 2 inches (50 mm) of
ground clearance.
Safety Precautions 2
Box Contents 3
Required Tools 3
Parts 3
Setting Up the Cigar Cooler 4
Attaching the Handle 4
Before First Use 4
Maintaining Cigar Humidity 5
Control Panel 5
Troubleshooting 5
Specifications 6
Customer Service 6
CONTENTS