Installation Guide

SH3287 Winter Garden Tent Assembly Instructions
Difficulty Level: Beginner
Setup Time: 10 minutes
Tools Required: None
- Look for a flat surface to keep the base of the tent stable.
- Snap the 4 straight tubes into the horizontal holes of the 3-way connectors, forming a
square on the ground.
- Connect the 4 long angular pipes with the shorter curved pipes using the one-way
connector. Repeat for all sides, then snap them into the vertical hole on all corners of
the square base.
- Then, connect the top section with the single 4-way connector.
- Drape the tent over the frame, secure it with the included tent pegs and ropes via the
green loops in the middle section.
- Lastly, hook the spokes into each ring at the bottom of the tent to seal it for greenhouse
effect.
- Use the zipper to access the interior.