Instructions / Assembly

You can add the hub by
either scan the QR code, or,
select “New GPRS Hub”
then type in the serial
number below QR code.
Now you need to pair the
Hub to the thermostat.
Once the Hub is added, a
new window will let you
add a device, select “scan
QR code or barcode” to
scan in the QR code on the
thermostat, which is
located on the side of the
thermostat.
Your app should now show the Smart Thermostat icon. From there you can adjust your temperature and
humidity settings as well as turn the fan on or off.
Contact [e-mail] with any questions.