Installation Guide

You can add the hub by
either scan the QR code, or,
select “New GPRS Hub”
then type in the serial
number below QR code.
Now you need to pair the
Hub to the controller. Once
the Hub is added, a new
window will let you add a
device, select “scan QR
code or barcode” to scan in
the QR code on the
controller, which is located
on the side of the
thermostat.
Your app should now show the Smart Thermostat icon. From there you can adjust your temperature and
humidity settings as well as turn the fan on or off.
Contact [e-mail] with any questions.