Product Literature
SAND PRO® INFIELD GROOMER/BUNKER RAKE
MODEL 2040Z 3040 5040
ENGINE
Kawasaki® 2-cylinder, air cooled, gasoline engine; Gross HP 13.6 HP
(10.1 kW), Governed HP 12.2 HP (9.1 kW) @ 2400 rpm; Max torque
27.3 ft-lbs. (37.0 Nm) @1800 rpm; Displacement 36.7 cu-in. (603 cc);
Oil capacity w/filter 1.7 qts. w/filter (1.5 w/o filter); Oil Filter External,
spin-on
Vanguard®, V-twin cylinder, 4-cycle, OHV, air-cooled,
gas engine with cast iron sleeves. 16 hp (11.9 kW) at
3600 rpm. Displacement: 29.3 cu. in. (480 cc).
Oil capacity: 1.75 quart (1.8 liter). Electronic ignition.
Full pressure lubrication, oil filter. Base mounted
engine and pump with 4 isolation mounts.
Vanguard®, V-twin cylinder, 4-cycle, OHV, air-cooled,
gas engine with cast iron sleeves. 18 hp (13.4 kW) at
3600 rpm. Displacement: 34.8 cu. in. (570 cc).
Oil capacity: 1.75 quart (1.8 liter). Electronic ignition.
Full pressure lubrication, oil filter. Base mounted
engine and pump with 4 isolation mounts.
AIR CLEANER SYSTEM Heavy-duty single-stage cyclonic air filter with replacement element Remote-mounted 3-phase Donaldson® air cleaner.
FUEL CAPACITY 4.5 gals (17 liters) of unleaded gas (maximum 10% ethanol) 5.0 gallon (18.9 liter) of unleaded gasoline.
TRACTION DRIVE
Belt-driven independent infinitely variable unitized transmission,
with automatic tensioning system.
Direct driven hydrostatic variable displacement piston pump to 3 hydraulic motors for 3WD. Large, front
mounted hydraulic cooler and fan. Foot pedal control, forward/reverse. Patented Series/Parallel hydraulic
traction system keeps three wheels working together, virtually eliminates spin-outs.
GROUND SPEED
Forward 0-12 mph (0-19.3 km/h), Reverse 0-4 mph (0-6.4 km/h).
See Speed Limiter Kits below for additional information.
Infinitely variable 0-10 mph (16 km/h) forward; 4.3 mph (6.9 km/h) reverse.
TIRES/WHEELS
Drive Wheels 25x12- 9, 3 ply rating pneumatic tubeless demountable
with a Turf Tamer (knobby) tread. Front Wheel 16x7.5-8 4 ply
rating pneumatic tubeless demountable with turf traction tread.
Recommended tire pressure: 7 psi all tires
Three, 22 x 11.00-8 pneumatic tubeless tires on demountable, interchangeable wheels.
Tire pressure: 8-10 psi (55.2-69 kPa).
MAIN FRAME
Rectangular structured steel tube and high strength steel plate
welded construction.
Tricycle vehicle with welded rectangular tubular steel frame construction. Rear engine placement.
BREAKS
Twin levers with dynamic braking through hydrostatic transmission.
Hand actuated parking brake lever that controls two integral wet disc
brakes contained within transmission.
Dynamic braking through the hydrostatic transmission and hand actuated brake lever.
STEERING
Power steering controlled through two independent control sticks
with integrated dampeners. Min. turning radius: 0" (0 cm)
Manual front wheel steering. 15" (38 cm) diameter
steering wheel. Double lubed for life gearbox.
Hydraulic power steering. 15" (38 cm) diameter
steering wheel.
CONTROLS/GAUGES
Ignition: Off/Run/Start; Throttle: Low - High Idle; Choke: Open/Closes
choke plate; Parking Brake: Off - On LCD logic cluster includes hour
meter and safety interlocks for operator presence, neutral and
parking brake.
Hand-operated choke, throttle, and hydraulic control
for raising/lowering with float. Foot pedal controls
traction forward/reverse speed. Rear hydraulic lift
and lower controls. Gauges: hour meter.
Hand-operated choke, throttle, and hydraulic control
for raising/lowering with float. Foot pedal controls
traction forward/reverse speed. Front and rear
hydraulic lift and lower controls. Gauges: hour meter.
DIMENSIONS
Width: 71.5" (182 cm) with Nail Drag, Length: 84.8" (215 cm) with
Nail Drag, Height: 73.0" (185 cm), Wheelbase: 58.0" 147 cm,
Weight: 970 lbs. (439 kg) with Nail Drag.
Width: 58" (147 cm), Length: 67.5" (171.5 cm), Height: 45.25" (114.9 cm), Wheelbase: 42.75" (108 cm),
Weight: Net weight (less fluids): 930 lbs. (421.8 kg).
SEAT
High back cushion vinyl seat with drain hole, integrated armrest
and retractable seat belt; adjustment is 4 inches fore and aft.
High-back cushion seat w/drain hole. 4" (10.2 cm) front-back adjustment w/additional 1.75" (4.4 cm)
mounting adjustment. (Arm rests optional)
GROUND CLEARANCE 5.5" (14 cm) (at machine centerline 24 in tire) 6.0" (15.2 cm)
WARRANTY
2-year limited warranty. Refer to the Operator’s Manual for
further details.
Two-year limited warranty. Refer to the Operator’s Manual for further details. Briggs & Stratton® provides a
two-year commercial engine warranty and a lifetime Magnetron® warranty.
*Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
SPECIFICATIONS