Instructions / Assembly

Inspect your stilts prior to every use. Check for worn or

damaged parts and replace with genuine SUR-STILT parts.

Tighten but do not overtighten any loose nuts, wing bolts, or

screws.

If you have any comments or questions concerning your

stilts, please contact our Customer Service staff.

Position the straps with the

buckles on the outside of your

foot.

Feed laces through the rear

leg band holes. Double knot

laces to insure a secure

setting.

Set spring adjusters to

minimum compression. Set

adjustable stilt legs to the

lowest setting and tighten wing

bolts.

Take a moment now, and re-

check all of the components

you have assembled. Your

stilts should now be ready to

try on and adjust. Reposition

the leg bands and heel

brackets until you feel totally

balanced and comfortable.

You should stand straight on

your stilts so the stilts DO NOT

kick in, or kick out.

INSPECTING YOUR STILTS

QUESTIONS? NEED HELP?

Toll free : 1-888-443-8889

STRAPS & LACES

ADJUSTMENT

Check your stilts for wear and damage. Check and

tighten all nuts and bolts.

Cover any openings such as windows, stairwells or vents.

Do not over-extend your step or your reach while working

and walking on stilts.

Lubricate your stilts with silicone or graphite based

lubricants.

Clean with water. Dry stilts and floor plates after cleaning.

Load limit is 225 lbs. including working tools.

GENERAL PRECAUTION