Specification

S19-220
Wall-Mount Eyewash Unit
© 2014 Bradley
P.O. Box 309, Menomonee Falls, WI 53052-0309
800 BRADLEY (800 272 3539) [phone]
bradleycorp.com
Page 2 of 2 1/9/2014
This information is subject to change without notice.
Bradley_Eyewash_S19-220
All dimensions assume standard thread engagement. Variations in
manufacturing allow for +/-
1
⁄8" (3mm) per threaded joint. To find the
tolerance of a dimension, add the number of thread joints in between a
dimension and multiply it by
1
⁄8" (3mm).
Local codes may require the installation of a backflow prevention
valve to complete proper installation. Compliance with local codes
is the responsibility of the installer. Valve must be tested annually to
verify that it is functioning properly. Backflow prevention valves are
not included with the fixture and may be supplied by the contractor or
purchased from Bradley Corporation.
30½"
(775mm)
suggested
height to
floor
15½" (394mm)
Ø 10" (254mm)
7³⁄₈"
(187mm)
4½"
(114mm)
7¼"
(184mm)
4"
(102mm)
2¼"
(57mm)
5¼"
(133mm)
Ø ⁵⁄₁₆"
(8mm)
13¼"
(337mm)
8¼"
(210mm)
36"
(914mm)
suggested
height to
floor
Wall