Installation Guide

4 Customer Care Center 1-800-732-2677
Kit Includes
Shoulder Height Shoulder Height
Center
Line
4- Way Locking
Interior Cat Door
Radio Systems Corporation • 10427 PetSafe Way, Knoxville, TN 37932
1-800-732-2677 • www.petsafe.net • 2015 Radio Systems Corporation
408-100
NOTICE
When applying cutting template
there should be a minimum of 3”
between the bottom and sides of
the door and the outer edge of the
cutting template to maintain the
structural integrity of the door.
Tools Needed
Double sided
foam tape (4pcs.)
Cutting Template
Installation
Guide
Exterior Frame
Interior Frame
with flap and
4-way lock
¾” (19mm)
Screws (4pcs.)
Tools Needed
½” (13mm) Drill Bit
Hammer
7
/
64
” (3mm) Drill Bit
for metal doors
5
/
64
” (2mm) Drill Bit
for wood doors
Slotted & Phillips
Screwdrivers
Pencil
Masking or
Painter’s Tape
Tape Measure
Level
Drill
Safety
Equipment
Jigsaw
NOTE: The 4-Way Cat Door can be installed in most interior doors and walls. Installation in thinner or thicker
applications may require additional skills, tools and materials (such as wood framing and hardware).
Key Definitions
• Outer Frame Size: Overall pet door dimensions
• Cut-Out Size: Dimensions of opening cut in homeowner’s door for proper fit and pet door installation
• Flap Opening Size: Usable flap size for pet to enter and exit through pet door
• Interior Frame: Pet door frame with flap and 4-way lock
• Exterior Frame: Pet door frame without flap or 4-way lock
• 4-Way Lock: White tab on bottom of interior frame used to control the pet’s access to the pet door.