Datasheet

RTP084F09N SPECIFICATION Revision: 1.0
2. ELECTRO- OPTICAL
CHARACTERISTICS
NO. ITEM CONDITION MIN. MAX. UNIT
1Operating Voltage -- -- 5VDC
2 Insulation Resistance 25VDC 20 MΩ
3
Terminal Resistance
X (Film Side) 400 1000
Ω
Y (Glass Side) 300 700
5Linearity Tolerance Note (1)1.5 -- %
6 Transparancy -- 78 -- %
NOTE (1): Voltage (DC 5V) is applied to X1 or Y2 and ground (0V) is applied to X2 or
Y1. Use stylus to draw straight lines (LX and LY) at 5mm intervals within
active area and detect the voltage at Y2 or X1 to measure the voltage
differences between X1 and X2 or Y1 and Y2.
Revision: 1.0 Author: MB/SK Date: 14.04.2010 Page: 4/6