User Manual

version number: 1.1.1.140508_PRO
Redsail Tech Co., Ltd
www.hflaser.com
25
Adjust the pinch rollers so there is one roller located on each side of the
vinyl (one cutter with 3 or more rollers, one roller near the center). Avoid
lowering a pinch roller to the gap between the two feed rollers.
Leave a gap of between ½”-1 ½” from the edge of the roller and the edge
of the vinyl on both sides.
Engage the Pinch Rollers by pushing down on the Pinch Roller Release
Levers.