User Manual

version number: 1.1.1.140508_PRO
Redsail Tech Co., Ltd
www.hflaser.com
20
Installing a New Blade
Loosen the locking knob on
the carriage arm.
Place Blade carriage into the
carriage arm.
Tighten the locking knob on
the carriage arm.
Set Brass Ring
on Blade
Carriage to the
fully down
position
Remove the
protective cover
from a new
blade.
Insert the blade
into the top of
the Blade
carriage.
Adjust the
carriage cap
until the blade
is protruding
approximately
1/64
th
of an
inch.
Adjust the Brass
Ring until it fits
snug against the
Cap. This will
help keep the cap
in place during
operation