User Manual

version number: 1.1.1.140508_PRO

Redsail Tech Co., Ltd

www.hflaser.com

P-

P- Button

Adjust the cutting force

For reducing the force when online, the lowest force is

50g.

A cutting force of 100g is a good general starting

place to work from when trying to determine the

force nee ded for a specific material. All cuttable

materials will differ in the amount of force needed so

proper testing should be always made to determine

the amount o f force to use. The amount of force used

should be enough to fully penetrate the material to be

cut while not enough to cut through the backing

material.

For moving the carriage a rm to the right position

when offline.

S+

S+ Button

Adjusts the cutting speed

For increasing the speed when online, the highest

speed is 600mm/s

A cutting speed of 16 inch/s is a reasonable default

speed that can be used for most cuts. When working

with smaller and more detailed images, a slower

speed may be required. When working with larger

and less detailed images, a higher speed can be used

to shorten the operation time.

For moving Y axis to the back position when offline.