User Manual

version number: 1.1.1.140508_PRO
Redsail Tech Co., Ltd
www.hflaser.com
12
TEST
TEST Button
Will cut a small test shape so that the c urrent force
and speed settings cutter will be tested. You can use
this to determine the proper force and speed setting
needed for different materials without wasting large
amount materials from cutting full designs.
Press “TEST” button when offline, the machine will
make self-test.
P+
P+ Button
Adjust the cutting force
For increasing the force when online, the highest
force is 500g.
A cutting force of 100g is a good general starting
place to work from when trying to determine the
force nee ded for a specific material. All cuttable
materials will differ in the amount of force needed so
proper testing should be always made to determine
the amount o f force to use. The amount of force used
should be enough to fully penetrate the material to be
cut while not enough to cut through the backing
material.
For moving the carriage arm to the left position when
offline.