MSDS

深圳市量能科技有限公司
SHENZHEN EPT BATTERY CO.,LTD.
地址:(中国)深圳市宝安区大浪街道石凹同富村工业区 31-33 栋
Tel:[phone] Fax:[phone]
http://www.ept-battery.com
Post:518109
心有能量 海阔天空
PEL (USA)
REL (USA)
TLV (USA)
MAK (Germany)
0,1* mg/m³
as Co; *for metal dust & fume, as Co
0,05* mg/m³
inorg. compds.: *metal dust & fume, as Co
0,02 mg/m³
as Co; BEI
einatembare Fraktion; vgl.Abschn.XIII
7429-90-5aluminium
PEL (USA)
REL (USA)
TLV (USA)
AGW (Germany)
15* 5** mg/m³
Metal dust *total dust **respirable fraction
10* 5** mg/m³
Metal dust *total dust **respirable fraction
1* mg/m³
*as respirable fraction
3* 10** mg/m³
2(II);*alveolengängige **einatembare Fraktion; AGS
8052-42-4Asphalt
REL (USA)
TLV (USA)
MAK (Germany)
Short-term value: C 5* mg/m³
*15-min
0,5* mg/m³
*inh. fraction; as benzene-soluble aerosol; BEIp
Dampf und Aerosol
·DNELs:Not available
· PNECs:Not available
· Additional information:The lists valid during the making were used as basis.
· Personal protective equipment
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes and skin.
· Respiratory protection:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposureuse
self-contained respiratory protective device.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.Due to
missing tests no recommendation to the glove material can be given for the product/ the preparation/the chemical
mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves:The selection of the suitable gloves does not only depend on the material, but also on further
marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked
prior to the application.
· Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to
beobserved.
· Eye protection:
Tightly sealed goggles