Installation Guide

27
The following tools and equipment are highly recommended to have available to assist with
installation but are in no way a comprehensive list of tools that can ease installation. Installers
feel free to substitute comparable equipment where appropriate.
Recommended tools to have before installation:
6mm Hex Bit
w/ Socket
Drive
Wrench
Tape
Measure
Caulking
Gun
Allows for tightening of
fasteners
Bit to be used with torque
wrench to drive hex cap bolts
within the system assembly.
Ensure drive side is sized
appropriately to your particular
socket wrench key (usually
3/8”).
Used to accurately mark
spacing of pilot holes which
locate the roof attachments for
the L-Feet.
Used to direct sealant into
penetrations to avoid leaking in
the roof.
Image
Composant
Description