Technical Specifications

PRINSCO GOLDLINE HD PIPE SPECIFICATION

Page 2 of 2

1717 16

St NE | 3

Floor | Willmar, MN 56201 | 800.992.1725 | www.prinsco.com

Installation

Pipe and fittings shall be installed in accordance with ASTM D2321 or ASTM F449 and Prinsco’s

published installation guidelines. Minimum cover for AASHTO H-25 loads shall be 12” to sub-grade in

trafficked areas where flexible pavement is installed and shall be 12” to the surface of rigid pavement.

Contact your local Prinsco representative or visit

www.prinsco.com for the latest installation guidelines.

Reference Specifications

This specification references the latest edition and revisions of the following standard specifications:

• ASTM F405 – Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

• ASTM F667 – Standard Specification for Large Diameter Corrugated Polyethylene Pipe and

Fittings

• ASTM D1248 – Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and

Cable

• ASTM D3350 – Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

• ASTM D2321 – Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers

and Other Gravity-Flow Applications

• ASTM F449 – Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for

Agricultural Drainage or Water Table Control

• ASTM D1056– Standard Specification for Flexible Cellular Materials – Sponge or Expanded

Rubber