Specification

5 of 9
25 • 30 • 36 • 45 • 60 kW available accessories
Protector
®
Series
Model # Product Description
006463-3 Mobile Link™
Generac's Mobile Link allows you to check the status of your generator from
anywhere that you have access to an Internet connection from a PC or with any
smart device. You will even be notified when a change in the generator’s status
occurs via e-mail or text message. Note: Harness Adapter Kit required.
006478-0 Harness Adapter Kit
The Harness Adapter Kit is required to make liquid-cooled units compatible with
Mobile Link™.
006175-0 - 25 & 30 kW
005630-1 - 36, 45 & 60 kW
Cold Weather Kit
If the temperature regularly falls below 32 °F (0 °C), install a cold weather kit
to maintain optimal battery temperature. Kit consists of battery warmer with
thermostat built into the wrap.
006174-0 - 25 & 30 kW
005616-0 - 36, 45 & 60 kW
Extreme Cold
Weather Kit
Recommended where the temperature regularly falls below 32 °F (0 °C) for
extended periods of time. For liquid cooled units only.
005651-0 Base Plug Kit Add base plugs to the base of the generator to keep out debris.
005703-0 - Bisque
005704-0 - Gray
Paint Kit*
If the generator enclosure is scratched or damaged, it is important to touch-up
the paint to protect from future corrosion. The paint kit includes the necessary
paint to properly maintain or touch-up a generator enclosure.
006176-0 - 25 & 30 kW
006172-0 - 36 & 45 kW
006171-0 - 60 kW
Scheduled
Maintenance Kit
The Liquid-Cooled Scheduled Maintenance Kits offer all the hardware necessary
to perform complete maintenance on Generac liquid-cooled generators.
006664-0 Wireless Remote
Completely wireless and battery powered, Generac's wireless remote monitor
provides you with instant status information without ever leaving the house.
006665-0
Wireless Remote
Extension Harness
Recommended for use with the Wireless Remote on units up to 60 kW, required
for use on units 70 kW or greater.
006873-0
Smart Management
Module (50 Amps)
Smart Management Modules are used in conjunction with the Automatic
Transfer Switch to increase its power management capabilities. It provides
additional power management flexibility not found in any other power
management system.
006510-0 E-Stop
E-stop allows for immediate fuel shutoff and generator shutdown in the event of
an emergency.
* Note: Bisque kits are used in conjunction with steel enclosures. Gray kits are used in conjunction with aluminum enclosures.