User Manual

RF Explorer User Manual page 29
Nagoya Telescopic NA-773
This is a telescopic, high quality 2dBi antenna ideally suited for 144MHz and 430MHz bands, typically used in
two way radios and HAM bands.
It offers a good response in all frequencies below 1GHz. Use this antenna in all ranges of frequencies
between 15-1000MHz. In some cases collapsing partially or totally may provide better response in the highest
frequencies of the range.
The metallic structure of the antenna is a direct connection to the core RF connection, therefore take
precautions for the antenna not being in contact with strong electric fields or DC current.
This antenna is included in RF Explorer WSUB1G, RF Explorer 3G Combo and RF Explorer ISM Combo.
Whip dipole antennas
These are quality 2dBi antennas designed for narrow band application.
Different RF Explorer models include different antennas; they may look exactly the same externally but are
internally tuned to a specific band and should be ideally used on that band only.
The core RF connection is enclosed in a plastic case, therefore protected from external electrical contact.
RF Explorer 433M: includes a 2dBi antenna tuned for 433MHz
RF Explorer 868M: includes a 2dBi antenna tuned for 868MHz
RF Explorer 915M: includes a 2dBi antenna tuned for 915MHz
RF Explorer 2.4G: includes a 2dBi antenna tuned for 2450MHz
RF Explorer ISM Combo and 3G Combo: In addition to the NA-773, the Combo models include a 2dBi antenna
tuned for 2450MHz.
Rubber duck 5.8GHz antenna
This is a quality antenna with good coverage in the range of 5.4-5.9GHz. It offers reasonable coverage in the
2.4 Ghz band too, so can be used as dual band antenna for WiFi.
This antenna is included in RF Explorer 6G, 6G Combo and Wifi Combo.