User manual

User Manual
Version 1.1
2013-09-09
RaspBee ZigBee addon board
www.dresden-elektronik.de
Page 15 of 21
8. Mechanical size
8.1. Dimensions
The RaspBee board (Figure 4) has a length of 48.0 mm, a width of 16.5 mm and a height of
12.0 mm (including socket for RPi).
Figure 4: Mechanical size
8.2. Housing
The slim board size allows the usage of housing for the RPi. Tested and recommended items
are:
 MULTICOMP - MC-RP001 white (FARNELL order code 2113797)
 MULTICOMP - MC-RP001 black (FARNELL order code 2113798)
 MULTICOMP - MC-RP001 clear (FARNELL order code 2113799)
9. Pin assignment
This section lists all available signals and their function on the RaspBee.
Note: The signal NC means Not Connected.
Table 10: Signal pin description
Signal pin description
Radio module pin
Signal
Function
Comment
28
PE0/RXD0
UART RX
Communication interface
29
PE1/TXD0
UART TX
Communication interface
4
RESET
Reset
10k pull-up onboard, low-active
27
PB7
SW1 / GPIO
15
PD7
LED1
Red, low-active
8
PG2
LED2
Green, low-active
57
RFOUT1
Wire antenna or
coaxial connector
Not assembled, trace terminated
with 49R9 resistor