Installation Guide

STRUCTURAL WALL | STONEGATE
®
COUNTRY MANOR
®
Reminiscent of the walls found scattered throughout the European countryside, Keystone’s Stonegate Country Manor
features a smooth, weathered stone appearance. Stonegate delivers all of the best features of the original Country
Manor, with a refined look. Maximize design potential by combining the 6"h (152mm) and 3"h (76mm) Stonegate
systems (check wtih your local Keystone producer to confirm availability).
Note: Unit color, dimensions, weight & availability varies by manufacturer.
Unique Appearance
• Produced in colors that enhance its
antiqued cut stone appearance.
• Artfully combines a smooth,
weathered stone face with a rustic
tumbled finish.
FEATURES & BENEFITS
Unit Dimensions & Weights:
Large: 6"h x 16"/14"w x 10"d; 60 - 65 lbs
(152mm x 406/355mm x 254mm; 27 - 29 kg)
Medium: 6"h x 12"/10"w x 10"d; 47 - 51 lbs
(152mm x 305/254mm x 254mm; 21 - 23 kg)
Small: 6"h x 6"/4"w x 10"d; 21 - 24 lbs
(152mm x 152/101mm x 254mm; 10 - 11 kg)
Cap Unit: 3"h x 12"/10"w x 11"d; 27 - 30 lbs
(76mm x 305/254mm x 279mm; 12 - 14 kg)
Units/sq.ft.: 2.9 (average)
Pin Specifications:
½" x 3¾" Shouldered Pins (13 x 95mm)
Large
Small
Medium
Cap Unit
Perfect for:
• Gravity retaining walls up to 3’h (0.9m)*.
• Parapet walls, pilasters, columns and
stairs.
• Outdoor living designs: fireplaces, fire
pits, kitchens, benches and more...
* Higher heights can be reached with
proper engineering and the use of
geosynthetic reinforcement.
Design Versatility:
Multiple textured sides permit units to be installed as an
exposed end unit or 90° corner.
• Each unit has three finished face dimensions; this design
variation simplifies the creation of random patterns -
assuring stunning results.
• Each unit’s 90° angle and a tapered (angled) side, allow for
the creation of 90° corners, tight fitting straight line walls,
and radii at curves.

Summary of content (2 pages)