Use and Care Manual
Please contact 1 888 255 3412 for further assistance.
For general maintenance, cleaning can be done with a dry cloth or soft brush vacuum. For more thorough
cleaning use a water-based oor cleaner, a mixture of 1 cup of vinegar per gallon of water, or 1/3 cup of
ammonia per gallon of water. Best practices are to lightly mist cleaning solutions onto molding and wipe it down
with a clean cloth.
Avoid using cleaning tools that could damage the molding like wet or jet mop. When vacuuming, use a soft
bristled hard surface aachment and ensure there is no abrasive debris such as pebbles/rocks stuck in the
bristles that could scratch your molding; do not use beater bars as they could damage the molding. Never use
detergents, soaps, waxes, or polishes, and avoid using products that contain these components.
MOLDINGS CARE & MAINTENANCE