Instructions / Assembly

- 7 -
Battery safety requirement
1. The battery is not allowed to work in a low voltage state, charge the battery immediately once
the low voltage alarms.
2. Free maintenance battery and no need of adding electrolyte.
3. To avoid leakage, please keep the battery dry; clean, especially to avoid erosion of pollutants
like metal powder.
4. The metal part such as the tool is banned to place on the battery so as to prevent burning out
the short-circuited battery.
5. When the battery is recycling please implement according to the local regulations.
6. The fire is prohibited to use when you hand or process the battery.
7. The charging room should be well ventilated.
8. When the sweeper is turned on, it is not allowed to connect or disassemble the battery.
Before Operation
Be careful!
1. Check whether the parts of machine are damaged during transit movement.
2. Close top cover, tighten the dustbin hook and make sure that the machine can work normally.
Start Operation
1. Driving mode
A. Ensure that the side brushes and the main brushes are in raised position.
B. Push the adjuster to decline side brushes.
C. Turn on the power, the side brush will work automatically.
D. Push the sweeper to the place you want to clean.
2. Cleaning mode
A. When you turn on the power button, the side brushes will work automatically.
B. When you turn of the power button, . the side brushes will stop working.
C. If the working environment is relatively bad, stop sweeping after intervals meanwhile use red
button to clean dust in filter.
D. Check the garbage and empty the dustbin in time
Notice: wire rope, belts and similar garbage is forbidden to sweep.