Instructions / Assembly

- 2 -
5. the reason why it is strictly prohibited to cleaning the wire rope, belts, high temperature
sundry, water, flammable or poisonous and harmful material is to avoid the winding, burning the
main brush and the side brush, to make it can't work normally.
6. It is prohibited driving in more than a steep slope or high-speed road meanwhile be careful
with sharp corners.
7. When the machine works, we should control the work speed less than 5km/h, and vibrate
dust every 30-45 minutes so as to achieve the best of cleaning effect.
8. Turn off the power after using and then try to put it in the house, store or flat place.
Warning!
1. Please read the maintenance instructions before any maintenance and repair operations.
2. Please keep your loosen clothing, hair, fingers and any part of the body away from air inlet of
machines and any moving parts.
3. Battery charger should get far away from high heat place.
4. Connecting the battery charger to the trunk circuit while ensuring the voltage and frequency
consistent with parameters of charger nameplate signs.
5. Don’t charge the battery if battery charger cable is damaged or battery immersion, besides,
damaged machine is also included.
6. The wire of battery charger shall not be used by pulling the machine and meanwhile don’t
regard charger wire as the handle.
7. Don’t open voltage switch and start operation during battery charging period.
8. Please don’t be placed in the open air so as to avoid electric shocks.
9. Don’t treat the machine as a toy; especially pay attention to keep the children far away.
10. Remember to take off the key when the machine stops.
11. Don’t drive on the steep slope which is far from its limit.
12. If the thickness of roads waste is more than 2 millimeter, please adjust the running speed of
the machine according to adhesion of the ground garbage, and then repeat cleaning operation.
13. Don’t put the cup or the bottle with other liquid water on the machine.
14. The operation duration shall not exceed 30 minutes when the temperature is 40 degrees or
above. A t this time, the machine is not only vibrated dust and cleaned dirt, but also rest for 5-15
minutes and then for the next operation.
15. Never put the machine as a means of transport.
16. When the machine is not working, stop rolling the brush to avoid to wear brush, leading to
affect the used life
17. Once fire, don
’
t put out the fire with water just use the power fire extinguisher.
18. Don’t bump the dangerous shell on which may drop down items.
19. Don’t change safety protection device of the machine. Execute according to the
maintenance program.