Instructions / Assembly

- 12 -
2. Press brake pedal
3. Turn off key
4. Open left side door
5. Adjust bolt A to make B fall to suitable position (Picture 12)
6. Lock bolt B
7. Check brush side again
8. If the brush is abrasion, need to change .
Replace side brush
Be careful!
Please wear gloves to prevent being scratched
when replacing side brushes.
1. Park machine on flat ground
2. Turn off key
3. Screw off nut A (Picture 13), and press brush to
remove it
4. Change new one and tight nut A
5. Check and adjust side brush height.
Picture 12
Picture 13