Instructions / Assembly

- 9 -
Maintenance schedule
Maintenance operation
Before first using
Every 10 10
hours
Every50 10
hours
Every100 10
hours
Every200 10
hours
Every400 10
hours
Check the height of side brushes and
main brushes by adjusting
Whether main brushes and side brushes
are winded by the cable or wire material
Check whether the garbage filtering is
cleaned completely
Trial operation and check isolate leather
Oil lubrication point
Check the vibration filter
The drive belt of main brushes
Check screws or Screws cap being
tightened
Check the brake pedal
Check wear and tear conditions of
main brushes and side brushes
Replace the drive belt of main brushes
Check and replace Main brushes
and drive system carbon brushes
Note: The interval time of the maintenance can be changed, but it has to be decided by the
professional personnel who are responsible for maintenance.
Notice: Check the pressure of the main brushes on the ground
Check whether the brush is in the right position , the process is as follows:
1. Operate the machine on the flat road.
2. Keep the main brush stop and rotate for a few second.
3. Check the trace of the main brush, along which you need to see whether the length is 2-4 cm,
if not, adjust the pressure between brushes and ground. The screw is used to adjust the height
of main brushes from the ground.
4. Please replace when the brush is abrasion, must be adjusted.