Instructions / Assembly

- 8 -
Stop Operation
1. Turn off the key button.
Empty the dustbin
1. Stop and clean filter .
2. unlock hook of dustbin
3. Pull the dustbin downward, then drag out to empty.
4. Put the dustbin back inside the machine and fasten the locking buckle of dustbin.
5. Finish routine examination for the next work.
6. Push or drag machine
After operation
Please perform the operation before leaving the machine when finish working.
1. Use adjuster to raise the side brushes.
2. Use red button to clean dust in filter.
3. empty the dustbin
4. Turn off the power and take off the key.
If you don’t use the machine for a long time (at least 15 days)
Please do as follow:
1. Check and keep the machine dry
2. Disconnect the battery terminal, recharge at least one time per month
Repair and maintain machines
1.The machine maintenance shall be according to correct routine.
2. Perform strictly according to the maintenance schedule.
3. Warning!
4. Perform maintenance operation after stopping the machine, (pulled out the key), remove
battery when necessary, please read the instructions carefully about safe sections.