Instructions / Assembly

PAGE 2 OF 2
WWW.QUIETDOCKHINGE.COM
INSTALLATION INSTRUCTIONS
STEP 3
DRILL THROUGH THE DOCK FRAME USING THE HINGES AS A
TEMPLATE, USING A 9/16” DIA. DRILL BIT.
STEP 4
INSTALL 1/2” DIA. CARRIAGE BOLTS THROUGH THE FRAME,
AND SECURE WITH WASHERS AND NUTS ON THE INSIDE OF
THE DOCK FRAME. NOTE: LAG BOLTS ARE NOT
RECOMMENDED FOR ULTIMATE STRENGTH.
STEP 5
INSTALL HINGE PIN, AND COTTER PIN.
1/2” DIA. CARRIAGE BOLTS