Instructions / Assembly

7
5
6
Before uncoiling the wall, make sure the pre-punched holes
for the skimmer and pump return are at the top and facing
the planned locaon of your lter.
BEAM
BAR
SAND
DETAIL 7.1
Insert the tracks on each side of the boom plates (see
Illustraon 6.1).
Illustration 6.1
Illustration
Assemble all boom tracks to the boom plates to form
a perfect circle with a diameter and a radius in accord-
ance to the chart
ATTENTION INSTALLERS: The radius must be measured from the center of the track cavity, where the wall will be in-
stalled, to the center of the pool. Before unrolling the wall, make sure the space between tracks is equal all around the
perimeter. To display the tracks and not have a perfect circle in accordance to the chart in diameter would greatly
complicate the following installaon instrucons and could cause irreparable damage to the structure of the pool as a
whole during the pool’s lling up stage.
A POOL DIAMETER POOL RADIUS NUMBER OF TRACKS NUMBER OF PLATES
8' 2,31m (7'-7'') 1,16m (3'9 1/2'') 12 12
12'
3,68m(12'-1'') 1,84m(6'- 1/2'')
10 10
15'
4,57m (15'-0'') 2,29m (7'-6'')
12 12
18'
5,44m (17'-10'') 2,72m (8'-11'')
12 12
21'
6,38m (20'-11'') 3,19m (10'-5 1/2'')
14 14
24'
7,29m (23'-11'') 3,64m (11'-11 1/2'')
16 16
27' 8,18m (26'-10'') 4,09m (13'-5',) 18 18