Data Sheet

PTW-42 4WD Inspection and Surveillance Robot
with PTZ Camera
Overview
SuperDroid Robots, Inc | 224 Technology Park Lane | Fuquay-Varina, NC 27526
919-557-9162 | www.superdroidrobots.com
Revised: Nov 7, 2016
Standard Configuration
This robot is the perfect solution for
getting into tight spaces with low ceiling
height.
Available in wireless and tethered
versions, this compact robot can inspect
in all the places you can’t!
Contact us for customization options.
Chassis: Custom 4WD ATR Welded Aluminum Base
with IG42 gear motors
Speed: up to 320 feet per minute
Runtime: Up to five hours
Camera System: PTZ camera under a dome. 360 degree pan,
90 degree tilt, 10X Optical zoom
Dimensions: Approx. 4“ ground clearance. 20.5" x 23" x 14" (W x L x H)
Weight: 44lbs as configured
Interface: Custom Remote System with Tablet OCU, selected below.
Assembly: The entire robot will be assembled, configured,
tested, and supported by our professionally trained staff here in NC.
Other Options
Encoder Option: This option allows you to keep track of the
distance the robot has travelled and displays the information on
the tablet controller. This is great for keeping track of where
you are when you see something of note with the inspection
camera.
Custom Paint Option: The robot comes standard painted
SuperDroid Blue, but if you have a custom color in mind, we can
do that!
Control Options
Wi-Fi Control System: For use in open areas and short
distances into unobstructed areas. Wi-Fi will not typically
work well underground, in pipes, etc. where the wireless
signal is degraded or blocked.
Wi-Fi and Tethered System with 250ft Ethernet Cable:
When the signal is too weak for wireless, plug in the
supplied 250ft Ethernet cable to switch to tethered mode.
We use high quality outdoor rated cable with waterproof
connectors. With this option, the cable is not on a spool.
Shorter lengths of the cable can be made. Contact us if you
need a custom cable length.
Wi-Fi and Tethered System with 250ft Ethernet Spool: This
is the same as the previous option except the cable comes
on a spool. The spool allows easy deployment and
retraction of the Ethernet cable.
Tethered System with 500ft Cable Spool: For those that
know wireless will not work for your application and need
to go up to 500ft, this is the best option. The robot will only
operate when the tether is connected between the tablet
and the robot. If you need a shorter cable, please contact
us.