User Manual

-9-
OPERATION INSTRUCTIONS
Note: Use proper solvent for thinning. Use lacquer for all lacquers,
paint thinner or all oil based paints and clean water for all latex
based paints. Read the labels of the paint you are using carefully
for correct thinning and cleaning up of Air Brushes.
Mixing and Thinning Paints:
Generally new paint is thick and must be diluted before attempting to spray with Air
Brush. The following rules apply when mixing and diluting paint;
1. When mixing colors, it is recommended to mix only paints of the same type;
2. Enamel and lacquer paints should be diluted with thinner at one to one (1:1) ratio.
Make sure to read the paint manufacturer’s recommendations for using with Air
Brush;
3. Before spraying, make sure that the diluted paint is thoroughly mixed;
3. Easy Assemble Hose Nut
Apply Easy Assemble Hose on Air Brush makes the connection
to air hose a lot easier.
4. Air Adjustor Lever
Air Adjustor Lever enables non air pressure adjust capable Air
Brush with air adjust function.
1. Air Adjustor Nut
Air Adjustor Nut helps control air pressure directly from the
Adjustor instead of from compressor.
2. Mini Separator
Mini oil-water Separator on Air Brush helps block moisturized
air from coming into the Air Brush.
E. Accessories