Data Sheet
2
Rev. 1/22
Pro Core
®
648s Specifications
*
The ProCore 648s is manufactured
in Tomah, WI ISO 9002 Certified Plant.
* Specifications and design subject to change without notice. Products depicted in this literature are for demonstration purposes only.
Actual products offered for sale may vary in use, design, required attachments and safety features. See distributor for details on all warranties.
PROCORE 648S, MODEL 09960
ENGINE
Kohler®, 2-cylinder, air-cooled, 23 hp (17.1 kW) gross, 19 hp (14.2 kW) net @ 3000 rpm, 41 cu-in. (674 cc) displacement. Dry, large capacity, replaceable element air
filter. External spin-on oil filter, 2-quart (1.9-liter).
FUEL CAPACITY
7.5 gallons (28.4 liter), gasoline.
ELECTRICAL
12-volt, 15 amp regulated charging alternator/generator. BCI Group No.: U1 battery, 300 cold cranking amps @ 0°F. Micro-processor logic control.
DRIVETRAIN
Series-Parallel, closed loop, hydrostatic drive. 3WD, except 2WD while traveling in forward direction in aeration mode with coring head raised. Electronically
controlled variable displacement piston type pump. High-torque, low-speed wheel motor drive.
HYDRAULIC SYSTEM
Remote spin-on filter. 3.0- gallon (13.2 liter) capacity, Toro PX Extended Life hydraulic fluid.
CONSTRUCTION
Welded steel frame with cast crank and arm assembly.
TIRES
20 x 10-10, 2-ply rated, smooth tread, tubeless, inflated to 12 psi, de-mountable rims.
BRAKES
Dynamic braking through hydrostatic transmission. Parking brake actuated when steering handle is raised into storage position.
GROUND SPEED
Transport Mode: Aeration Mode: Aeration Forward Spacing:
Forward: 0-4.5 mph (0-7.2 km/h), variable Forward: 0-2.5 mph (0-4.0 km/h), variable 1-4.5” (2.5-11.3 cm) in 0.25” (5mm) increments
Reverse: 0-2.0 mph (0-3.2 km/h), variable Reverse: 0-2.0 mph (0-3.2 km/h), variable 1” (2.5 cm) spacing: 0.51 mph (0.8 km/h)
2” (5.0 cm) spacing: 1.03 mph (1.65 km/h)
3” (7.5 cm) spacing: 1.54 mph (2.46 km/h)
4” (10.0 cm) spacing: 2.06 mph (3.30 km/h)
INSTRUMENTATION
InfoCenter™, tachometer.
CONTROLS
Redundant operator presence bails, aeration start/stop bails and traction speed thumb wheels on handle. Tine length calibration, tine depth and forward hole
spacing set and saved in InfoCenter. Bump stop, delayed or immediate drop switch, cruise control on/set/off switch, aerate or transport switch and optional LED light
kit switch located on operator console. Ignition, tachometer on side console. Throttle and choke on engine.
INTERLOCKS
Operator presence, clutch latch, traction neutral, coring head raise/lower.
DIMENSIONS
Length Width Height Wheelbase Track Width Weight (dry) Ground Clearance
Handle Down: 116.3” (293.1 cm) 50.12” (127.3 cm) Head Raised 45” (114.3 cm) 44.5" (113 cm) 38.3" (97.3 cm) 1,642 lbs (744.7 kg) 4.75" (12.1 cm)
Handle Raised: 91.8” (231.3 cm) Head Lowered 36.5" (92.7 cm)
Handle Raised: 60.7” (153.0 cm)
Handle Lowered: 47.5” (119.7 cm)
CERTIFICATION
ANSI B71.4-2017. CE & EU machinery directives.
WARRANTY
Two-year or 500 hour limited warranty. Refer to the Operator’s Manual for further details.
TINE HEADS
TINES
Model Description Lateral Spacing Mount Diameter
09739 Needle Tine 1.6" (2.8 cm) N/A
09736 Mini-Tine (2 rows of 5) 1.6" (2.8 cm) 3/8"
09737 Mini-Tine (1 row of 6) 1.3" (3.3 cm) 3/8"
09794 3 Tine 3/4" 2.6" (6.8 cm) 3/4"
09796 4 Tine 3/4" 2" (5.1 cm) 3/4"
09797 3 Tine 7/8" 2.6" (6.8 cm) 7/8"
09719 QuickChange
®
4-Tine 2" (5.1 cm) 3/4" or 7/8"
ACCESSORIES
Model Description Part Number Description
09962 LED Light Kit, ProCore 648s 114-0590-01 QuickChange* Tool
09220 Windrower Kit 115-4754 Wireless Hour Meter
09225 Tire Scrapers
09234 Rear Roller Kit
TINES
Over 100 Titan Tines in multiple varieties available from Toro.
See the Toro Titan Tines Catalog or visit toro.com/titantines