Nozzle Literature

SPECIFICATIONS
Operational
• Radius: 14-26 feet (max radius at 75 psi operating pressure)
• Operating pressure range: 40-75 psi (use of the Precision
™
Check
Valve is not recommended on systems with an operating pressure
of less than 40 psi.)
• Recommended operating pressure: 45 psi
• ½” NPT Female inlet
• Check height: up to 15 feet
Warranty
• Two years
Specifying Information—PRN Shrub & Slope Kit
PRNTX-SX-PCV
Model Arc Riser Type PCV
PRN X S X PCV
PRNT - Precision
™
Rotating Nozzle
(Toro male thread)
A - Adjustable
F - Full Circle”
S - 570ZSXF Shrub Riser Blank - Standard
E - Effluent (lavender body)
PCV - 15’ Precision
™
Check Valve
Example: A Shrub & Slope Kit with an adjustable arc pattern and lavender-colored Riser would be specified as: PRNA-SE-PCV
PRN SHRUB & SLOPE KIT MODEL LIST
Model Description
PRNTA-S-PCV
PRNTF-S-PCV
Adjustable Arc kit with X-Flow
®
and 15’ Check Valve
Full Circle kit with X-Flow
®
and 15’ Check Valve
(Designate ‘SE’ in model number for euent option)
Additional Features
Maximum stream trajectory of 20° to help fight wind
and minimize drift
Radius reduction of up to 25% by turning set screw
at top of nozzle
Integrated X-Flow
®
Technology
Pre-assembled for ease of installation
Pre-installed adjustable or full circle
Precision
™
Series Rotating Nozzle
delivers multiple wind-resistant,
low trajectory streams at a matched
precipitation rate of 0.6 inches per hour.
Toro 570SXF
Shrub riser with patented X-Flow
®
Technology prevents water waste by
eliminating 99.9% of the flow through the
riser in the event the nozzle is removed.
Ideal protection against vandalism and
theft, or for maintenance convenience.
(Flush laterial line before installing)
With a hold-back strength of up to
fifteen (15) feet, the Precision
™
Check
Valve is spring-activated and provides
an immediate check at system shut-
o, making it ideally suited for slope
settings. ½” FxM NPT Thread.
PRECISION
™
SERIES ROTATING NOZZLES PERFORMANCE DATA
(ADJUSTABLE) 45º - 270º
Arc psi gpm Radius
Precip. Rate
n (in./hr.)
Precip. Rate
 (in./hr.)
90°
40 0.62 20.5 0.57 0.66
50 0.75 22.5 0.57 0.66
60 0.82 23.5 0.57 0.66
180°
40 1.22 20.5 0.56 0.65
50 1.46 22.5 0.56 0.64
60 1.61 24.0 0.54 0.62
270°
40 1.62 19.0 0.57 0.66
50 2.00 21.5 0.55 0.64
60 2.26 23.0 0.55 0.63
PRECISION
™
SERIES ROTATING NOZZLES PERFORMANCE DATA
(FULL)
Arc psi gpm Radius
Precip. Rate
n (in./hr.)
Precip. Rate
 (in./hr.)
360°
40 2.56 20.9 0.56 0.65
50 3.09 22.9 0.57 0.65
60 3.34 23.8 0.57 0.66
Nozzle data subject to change.
www.toro.com
The Toro Company • Irrigation Division • 5825 Jasmine St. Riverside, CA • 92504 • 877-345-8676
Specifications subject to change without notice. For more information, contact your local Toro distributor.
©2017 The Toro Company. All rights reserved. P/N 17-1153-IRC
17-1153-IRC-PRN-Shrub-Slope-SS.indd 2 3/14/17 10:39 AM