Installation Guide

WALL HOOD INSTALLATION

STEP 4

Install Chimney*

• Remove protective film coating.

• Place the two pieces of chimney on top of the range hood, making

sure the vent in the upper section is towards the top and the upper

section slides inside the lower section in a telescoping manner.

• Attach the top section of the chimney to the mounting bracket,

allowing the bottom section of the chimney to rest securely on the top

of the hood.

• Screw the base of the chimney to the top of the hood (if there are

mounting holes available).

*Not all styles of wall mount range hoods have chimneys (Undercabinet & Insert styles are

typically without a chimney). Chimneys usually come in two telescoping pieces unless they are

custom cut.

STEP 5

Install Grease Filter

• Remove protective tape or film coating.

• Insert spring loaded filter in to place.

This concludes the installation of a wall hood. If you

have any questions about the installation process please

call Proline Customer Service at 877.901.5530 or visit

prolinerangehoods.com.