Instructions / Assembly

Portable Post
Piper Instrument
Assembly
3/8" x 12" Stake
6"
TYP
Holster
Portable Brace
T25 2" Screw
RECYCLED POST PORTABLE INSTALLATION PROCEDURES
Step 1:
With Holsters installed onto the Instrument (see sheet 6 for Holster installation instructions) place the Portable Posts to a 13 3/4" offset on center.
Step 2:
Place the Instrument Assembly onto the Portable Posts. Verify correct placement, levelness, and plumbness of posts.
Step 3:
Refer to sheet 6 for installation of instrument to posts.
Step 4:
Install the Portable Posts Brace 6" below the backside of the Holsters. Fasten down using the provided T25 2" Screws.
Step 5:
Screw heads should be flush with the outer surface of the Brace when properly installed. Drive screws in slowly to prevent stripping.
Step 6:
3/8" x 12" Stakes are provided and can be installed through the feet of the Portable Posts to prevent Instrument from moving around during use.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
FREENOTES HARMONY PARK IS
PROHIBITED.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
WWW.FREENOTESHARMONYPARK.COM
SHEET 5 OF 6
SCALE: 1:13
PIPER 2016
PRODUCT SHEET / INSTALLATION GUIDE