Instructions / Assembly

3" Lg. SS Phillips Head Screw
Mallet Bracket
Threaded Rod Support
Threaded Rod
Stop Nut
Instrument Post
Instrument Assembly
1/2" Tamper-Resistant
Set Screw
Threaded Rod Support
1/2" Tamper-Resistant
Set Screw
INSTRUMENT TO POST INSTALLATION PROCEDURES
Step 1:
Start by fastening the Threaded Rod Support, Mallet Bracket, and Instrument Post together with the
provided (4) 3" Phillips Screws. Make sure the three parts are aligned by thier vertical marks.
Step 2:
Next thread the Instrument Assemlby's threaded rod into the Threaded Rod Support on the
Instrument Post. Tighten until the Stop Nut makes contact with the Threaded Rod Support.
Step 3:
Take the 1/2" long Tamper-Resistant Set Screw and thread it through the Threaded Rod Support
all the way into the Threaded Rod. This secures the Instrument Assembly so that it can not be
backed out.
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
FREENOTES HARMONY PARK. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
FREENOTES HARMONY PARK IS
PROHIBITED.
FREENOTES HARMONY PARK
194 BODO DRIVE, UNIT F
DURANGO CO 81303
TEL: [phone]
FAX: [phone]
EMAIL: [e-mail]
WWW.FREENOTESHARMONYPARK.COM
SHEET 5 OF 5
SCALE: 1:6
PRODUCT SHEET / INSTALLATION GUIDE
PAGODA BELLS 2016