Product Literature

Additional features
• Internal and external bleed
• Available in electric or pressure-regulating models
• No external tubing for either pressure-regulating model
• Standard, built-in Schrader-type valve for downstream
pressure verification
• Flow control independent of solenoid
• Self-aligning bonnet to ensure correct installation
• Self-cleaning stainless steel metering rod
Specifications
Dimensions
• 1” – 6
3
/
4
” H x 3
5
/
8
” W
• 1.5” – 7
1
/
4
” H x 3
5
/
8
” W
• 2” – 9
1
/
2
” H x 6
1
/
8
” W
• 3” – 10
3
/
4
” H x 6
1
/
8
” W
Operating Specifications
• Flow Range:
– 1”: 5 to 40 GPM
– 1.5”: 30 to 100 GPM
– 2”: 80 to 180 GPM
– 3”: 150 to 300 GPM
• Operating Pressure:
– 1” and 1.5” models: 10 to 220 psi
– 2” and 3” models: 20 to 220 psi
• Regulated Outlet Pressure Range:
– EZR-30: 5 to 30 psi +/- 3 psi
– EZR-100: 5 to 100 psi +/- 3 psi
• Minimum Pressure Differential (between inlet and outlet) for
Pressure Regulation: 10 psi
• Body Styles: Globe/Angle with female threads
• 102-5073 Solenoid:
– Inrush: 60 Hz, 0.4 amps
– Holding: 60 Hz, 0.2 amps
P-220 Scrubber Series
Options Available
• EZR-30: EZReg, 5-30 psi regulator module
• EZR-100: EZReg, 5-100 psi regulator module
• EFF-KIT-60HZ: Effluent Water solenoid assembly and
warning tag (lavender color; 24 VAC, 60 Hz)
• 102-5073: 24 VAC solenoid assembly (60 Hz, 18-inch leads,
and captive plunger)
• DCLS-P: Potted DC latching solenoid assembly
Warranty
• Five years
Toro P-220 Scrubber Valve
Size Config.
Gallons per Minute (GPM) Flow
5 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 180 200 250 300
1"
Globe
4.63 4.74 3.10 6.05 10.75
Angle
4.14 4.64 2.54 5.53 9.46
1.5"
Globe
1.14 1.56 2.85 4.36 6.28 8.57 11.20 14.03 17.20 20.46
Angle
0.95 1.51 2.28 3.69 5.29 6.97 9.26 11.80 14.60 17.40
2"
Globe
3.57 4.62 5.33 6.80 8.20 9.02 10.46 11.61
Angle
2.79 3.50 4.41 5.62 6.39 7.35 8.81 9.37
3"
Globe
2.06 2.34 2.70 3.88 4.86 7.26 10.23
Angle
1.86 2.16 2.44 3.35 4.11 6.42 9.31
Note: For optimum performance when designing a system, be sure to calculate total friction loss to ensure sufficient downstream pressure.
For optimum regulation performance, size regulating valves toward the higher flow ranges.
Flow rates are recommended not to exceed 5 psi loss.
www.toro.com
The Toro Company • Irrigation Division • 5825 Jasmine St. Riverside, CA • 92504 • 877-345-8676
Specifications subject to change without notice. For more information, contact your local Toro distributor. ©2014 The Toro Company. All rights reserved.
P/N 14-1069-IRC Rev. A
Specifying Information—P220S
P220S-2X-XX
Model Activation Type Solenoid Size
P220S 2X X X
P220S—P-220S Scrubber
Series
Plastic Valve
26—NPT, Electric
27—NPT, Pressure-
regulated
EZR-100 (Standard)
0—Standard
Solenoid
9—DC Latching
Solenoid
4—1”
6—1.5”
8—2”
0—3”
Example: A 2” P-220S Series plastic electric, pressure-regulating valve
would be specified as: P220S-27-08
Model Description
P220S-26-04 P-220, 1" valve with ACT
™
System
P220S-26-06 P-220, 1.5" valve with ACT
™
System
P220S-26-08 P-220, 2" valve with ACT
™
System
P220S-26-00 P-220, 3” valve with ACT™ System
P220S-26-94
P-220, 1" valve with ACT
™
System and DC
Latching Solenoid
P220S-26-96
P-220, 1.5" valve with ACT
™
System and DC
Latching Solenoid
P220S-26-98
P-220, 2" valve with ACT
™
System and DC
Latching Solenoid
P220S-26-90
P-220, 3" valve with ACT
™
System and DC
Latching Solenoid
P220S-27-04 P-220, 1" valve with EZReg
®
and ACT
™
System
P220S-27-06 P-220, 1.5" valve with EZReg
®
and ACT
™
System
P220S-27-08 P-220, 2" valve with EZReg
®
and ACT
™
System
P220S-27-00 P-220, 3" valve with EZReg
®
and ACT
™
System
P220S-KIT-04 1" Scrubber diaphragm assembly kit
P220S-KIT-06 1.5" Scrubber diaphragm assembly kit
P220S-KIT-08 2" Scrubber diaphragm assembly kit
P220S-KIT-00 3" Scrubber diaphragm assembly kit