Manualshelf

User Guide

ManualsBrandsUnbranded ManualsEnergy SavingOnline LED Controller T-300K (DMX 512, WS2811, WS2801 support, 8 ports, up to 8192 pxl)
123456
STATUS
Status light
The clock line
SD CARD
SD card slot
NOTE：According to TTL signal output， Ground of the controller must be connected to the lamp ground.
5.System architecture figure
Note：The IP address of the computer should be set to: 192.168.60.178
6. wiring diagram
1、控制器上外壳丝印DAT的为数据线,必须直接连到灯具上信号的输出端（CIN）.
2、控制器上外壳丝印CLK的为时钟线,此线在灯具IC为双线IC时才需要连到控制器上.
3、控制器上外壳丝印COM的,必须直接连接到灯具的负极上。
4. 该控制器通过内置交换机进行级联.
5. 电脑的IP必须设置为:192.168.60.178