AGH ASSEMBLY INSTRUCTIONS ITEM#: OF4501 Important Safety Instructions: ● Please read all instructions before beginning assembly ● Please make sure receive all the parcels to start the assembly ● For your safety and convenience,assembly by two people is recommended ● Use the parts and hardware lists to identify and separate each of the components included ● Save all packing materials until assembly is completed to avoid the accidental discarding of smaller parts or hardware ● Use of power tools is not recom
PARTS LIST X1 X1 X1 X1 X2 X1 X2 X2 X2 X2 X2 X2 X2 X2
HARDWARE LIST Qty. Spare Name A 14 1 P 2 B 14 1 Q 2 C 14 1 R 4 D 4 S 4 E 4 T 4 F 2 V 2 G 4 W 2 H 2 X 2 I 4 J 4 14 U1 2 12 U2 2 8 U3 4 Name Part K 1 Part Qty.
STEP 1 x8pcs x10pcs STEP 2 x6pcs x4pcs
STEP 3 STEP 4 x5pcs 1 2 3
STEP 5 x5pcs STEP 6 x4pcs 1 2 3
1 STEP 7 2 3 x4pcs STEP 8 x8pcs Finished Side Inclined Plane Inclined Plane
STEP 9 x6pcs STEP 10 x4pcs x2pcs 5/6" nail
Peel off the adhesive sticker's protective paper and bond it onto the designated position before secure with nails. STEP 11 x2pcs 1 2 1 2 x2pcs x12pcs 5/6" nail To avoid the top panel gouged by hammering, Please secure and hammering nails with careful.
Peel off the adhesive sticker's protective paper and bond it onto the designated position before secure with nails.
STEP 13 x4pcs With assistant carefully flip the other side. 5/6" nail x2pcs STEP 14 x1pcs x1pcs x6pcs 1 5/6" nail 2 Peel off the adhesive sticker's protective paper and bond it onto the designated position before secure with nails.
STEP 15 x4pcs x8pcs x4pcs Do not use power tools for Drawer Bracket STEP 16 1 2 x2 3 x8pcs x4pcs Do not use power tools for Drawer Bracket x2
STEP 17 Raw Side x2 STEP 18 x12pcs x2
STEP 19 x2pcs x4pcs x2 STEP 20 x8pcs x2pcs x2
STEP 21 x2pcs x4pcs x4pcs x2 STEP 22 STEP 1. STEP 2. STEP 3. ® -Move unit to final location. -Adjust drawer fronts as shown below. Step1--Loosen screws on back of drawer front brackets as shown. Step2--Position drawer front as required. Step3--Tighten screws while holding drawer front in position.
STEP 23 x2pcs x2pcs
STEP 24 1. Place unit in desired location. 2. Mark stud location on the wall, 1” below top and side of unit. 3. Drill 5/16”hole 2” deep at marks on the wall.
STEP 25 x2pcs x2pcs x2pcs 4 Wall 5 Pull to verify lock Wall
Maximum weight capacities MAXIMUM WEIGHT: 200 LBS (91 KG) MAXIMUM WEIGHT: 50 LBS (23 KG)
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental health Hazard Assessment(OEHHA) has deemed to cause cancer or other reproductive toxicity.
